|
|
| |
DaisyTemp Sensor : -55°C bis +75°C Temperatur Sensor, Serienschaltung bis zu 8 Sensoren
|
| |
|
| |
| |
| |
daisyTemp Sensor
The AKCP daisyTemp is a daisy-chainable temperature sensor solution designed for efficient temperature monitoring.
Up to 8 daisyTemp sensors can be stringed together and plugged into one securityProbe Intelligent Sensor port enabling the unit to measure up to a maximum of 64 temperature points. The daisyTemp can measure temperatures between -55°C to +75°C with a ±0.5°C accuracy.
Collected temperature values can be used to trigger alerts like e-mail, SMS, phone calls and SNMP traps. With the securityProbe unique mapping feature you can place these sensors on a map so you can quickly identify where you may have hotspots. Each temperature sensor has its own SNMP OID so that the data can be collected over the network using any Network Management System.
Each daisyTemp comes with a free 5 feet sensor cable. The sensor cables can be extended using Ethernet cable with a maximum daisy-chain length of 500 ft.
Specifications & Features:
Daisy-chainable temperature sensor with free 5 ft cable
Never needs calibration
Measurement range Celsius:-55°C to +75°C.
Measurement resolution Celsius: 1°C increments.
Measurement accuracy Celsius: ±0.5°C accuracy from -10°C to +75°C.
Measurement range Fahrenheit: -67°F to +167°F.
Measurement resolution Fahrenheit: 1°F increments.
Measurement accuracy Fahrenheit: ±0.9°F accuracy from +14°F to +167°F.
Communications cable: UTP CAT 5 wire.
Sensor type: semiconductor microprocessor controlled.
Power source: powered by the securityProbe. No additional power needed.
Power Consumption: Typical 10.70 mWatt , 2.14 mA
securityProbe auto detects the presence of the daisyTemp
Measurement rate: one reading every second.
Up to 8 daisyTemp sensors per intelligent sensor port, 64 sensors per securityProbe
Flexible sensor cable length using standard CAT5e cable (maximum 500 ft for the total daisy-chain).
|
|
|
Ansprechperson |
DANKE das SIE uns besuchen.

DI (FH) Günther Lugauer
Beratung & Verkauf
Technik & Installation
HIER finden Sie meinen
Kompetenzbereich
guenther.lugauer[a]bellequip.at
Tel: +43 (0) 2822 33 33 996
Mobil: +43 (0) 664 33 33 996
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
www.bellequip.at
Serverschrank Monitoring
Serverraum Monitoring
Rack Monitoring
Environmental Monitoring
Temperatur Überwachung
Serverrack Überwachung
Remote Monitoring
Potentialfreie Kontakte überwachen
Relais über IP
Relay over IP
Rack Monitoring
Remote Power Management
Secure Console Server
Device Server
Terminal Server
Serielle Lösungen
Datenkommunikation
Netzwerktechnik
GSM / GPRS / EDGE
UMTS / HSDPA
Wireless Communication
|
|