|
|
| |
HTemp-485, Luftfeuchtigkeits, Temperatur Sensor / Sensoren, Luftfeuchtigkeitssensor, Luftfeuchtigkeitsseensoren, Temperatursensor, Temperatursensoren, Temperature probe, Humidity probe
|
| |
|
|
|
|
| |
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with the Poseidon family units.
HTemp-485 measures temperature and humidity. The sensor is intended for indoor vertical wall mounting.
HTemp-485 measures temperature and humidity, communicates over 4-wire bus and up to 26 sensors can be connected parallely to a single bus. The sensor is intended for indoor vertical wall mounting.
The busbar uses 4 wires, two with a standard RS-485 line, the other two are used for sensors' power supply. The individual sensors can be powered by an external power source and can be connected by just two RS-485 line wires. RS-485 communication line works up to 1000m distance.
For temperature measuring the thermal sensor uses an integrated element with accuracy of ±0.5°C, humidity is as well measured by an external sensor with accuracy ±4%. The HTemp-485 module contains an indicator, signalizing by blinking that temperature (green) or humidity (orange) measuring is in progress.
Application
* Extensive measuring systems with many measuring points
* Climatization state measuring and measuring of living conditions in intelligent buildings
* Independent measuring in food warehouses and agricultural crops storage buildings
* Grocery storehouses and premises, hard measuring conditions
* Thermal and humidity monitoring in pharmaceutical storages
* Measuring in residential premises
* Industrial measuring and regulation
* After connection to the Poseidon – temperature transmission over Ethernet or Internet
* After connection to the Poseidon – possible logging of up to 100 000 values into internal Flash memory
Basic properties
* Temperature measuring within the range of -10°C to +80°C
* Measuring the relative humidity within the range of 0% to 100%.
* Up to 25 sensors connected parallely at one bus
* Communication and sensor state indication
* Communication over the RS-485 line (up to 1 000 m distance), simple communication protocol
* Minimal power consumption, possible power supply by unstabilized voltage
* The sensor by itself can send a temperature value according to preset time interval, which can be from 1 to 5000 seconds (circa 1 hour and 23 minutes)
* The sensor address on RS-485 bus can be set by jumpers inside the sensor as well
* Easy wall mounting, connection conductors can be led along the wall in molding or from below of the installation box.
* The sensor cooperates with SNMP thermometer Poseidon
|
| |
| |
|
|
Ansprechperson |
DANKE das SIE uns besuchen.
DI (FH) Günther Lugauer
Beratung & Verkauf
Technik & Installation
HIER finden Sie meinen
Kompetenzbereich
guenther.lugauer[a]bellequip.at
Tel: +43 (0) 2822 33 33 996
Mobil: +43 (0) 664 33 33 996
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
www.bellequip.at
Serverschrank Monitoring
Serverraum Monitoring
Rack Monitoring
Environmental Monitoring
Temperatur Überwachung
Serverrack Überwachung
Remote Monitoring
Potentialfreie Kontakte überwachen
Relais über IP
Relay over IP
Rack Monitoring
Remote Power Management
Secure Console Server
Device Server
Terminal Server
Serielle Lösungen
Datenkommunikation
Netzwerktechnik
GSM / GPRS / EDGE
UMTS / HSDPA
Wireless Communication
|
|
